BMW Mini R50 and R53 International Multipoint CDS roll cage kit. FIA Certificated
FIA Certificated: Fully certificated roll-cage designs give a distinct advantage over roll-cages constructed to minimum compliance as they are generally designed and manufactured using the smaller diameter and thinner gauge tubes, thus giving a considerable weight saving. An FIA / MSUK certificated roll cage Is accepted worldwide and enables to compete in FIA and International events.
MS UK Compliant: The roll cage has been made to MS UK (MSA) prescribed tube sizes. This means the cage was made to comply with all the current regulations. These cages are eligible for all MS UK events.
Multipoint (weld-in) roll cage: These have a minimum of 8 point attachments. Please note, HOWEVER – Because our roll cage will fit very closely to the body-shell it would be normal practice to weld the cage to the shell in at least an additional 8 or 10 places, (and sometimes many more) making a minimum of 16 points.
Weld-in roll cage kit: Our weld-in kits are supplied with all the parts you need to fit a roll cage. All the tubes are pre-cut and profiled to fit. They come complete with the footplates that get welded to the car, as well as all relevant gussets.
Fully certificated roll-cage designs give a distinct advantage over roll-cages constructed to minimum compliance as they are constructed using a small diameter / thinner gauge tube, thus giving a considerable weight saving.
Depending on the make & model, a fully certificated roll cage gives you the ability to compete in FIA, International events.